AI-accelerated · checked by a quantity surveyor

Know what your project will cost — before you speak to a builder.

Planning an extension, refurbishment or new build? Upload your plans and tell us what you have in mind. We'll price every part of the job, from demolition through to decoration, using a cost model built on real London projects — and a practising quantity surveyor personally signs off every estimate. So when the quotes come in, you'll know a fair one when you see it.

£295 fixed · estimate back within 3–5 working days · London to East Anglia

A cost model does the heavy lifting. A quantity surveyor checks every figure before it reaches you.

How it works

From your plans and your brief to a costed estimate, in four steps.

  1. 1

    Tell us about your project

    Your plans, plus what you are actually doing to the house — the kitchen, the bathrooms, the finishes, what stays and what goes. The things a drawing never shows. Takes a few minutes.

  2. 2

    Pay securely

    A fixed £295, taken at checkout. No subscription, no surprises.

  3. 3

    We price it

    We measure your drawings room by room, and your information runs through our calibrated cost model — then a quantity surveyor reviews and checks every figure.

  4. 4

    You get your estimate

    The finished estimate, delivered to your inbox within 3–5 working days.

What we actually price

One project. One estimate.

Few people build just a side return, or just a loft. Sometimes it’s both, with a full refurbishment of the house in between. Sometimes it’s a side return, a kitchen and underfloor heating to the ground floor. It could be a rear extension and the girls’ bathroom on the first floor, or a partial basement dig and the repair works. Tell us the whole project and we price it as one job.

Not this: a side return price + a loft price + a refurbishment price

But this: your whole project → 23 sections → one estimate, with a range

Add up three separate prices based on square metre rates, and the scaffold, skips and site management are counted three times, while the work where the parts meet is missed. Here is one priced as a whole: a side return, a rear extension, a kitchen and underfloor heating in Stoke Newington.

How much of it is invisible on a drawing? On the estimate we have published in full, the single largest section was the kitchen and the fitted joinery — none of which appeared anywhere on the sketch we were sent. It was priced because the client described it.

What you get

A costed estimate, unique to your build.

Enough to decide whether to go ahead, set a budget, or test an idea — before the serious fees start.

A sample

What it actually looks like.

Every job comes back as a costed document, set out section by section — preliminaries and groundworks through structure, finishes, mechanical and electrical — with quantities, subtotals, contingency and risk, and the assumptions and exclusions stated in full.

A 44-second video with no sound. On interpolr.com, a visitor clicks Price my project, drags a sketch of their flat into the upload box, adds the address and a rough floor area, and describes the work in their own words. They pay £295 by card. Three to five working days later the estimate arrives by email: a PDF setting out the job, what it was priced from, every line with its quantity and cost, and a total with a realistic range.

The estimate at the end is a real one, anonymised — see it in full, and what the job was finally built for → Yours arrives as a PDF with your numbers in it.

What's included

A full, costed feasibility estimate for your project: each part of the works priced and subtotalled — from demolition through to finishes — with sensible allowances for contingency and risk, and a realistic range for the total. It's prepared from your drawings and the information you give us, then reviewed and signed off by a practising quantity surveyor before it's sent.

A feasibility estimate is there to guide early decisions — it is not a fixed quotation or a tender. The full scope and exclusions are set out in our Terms.

Questions

Accelerated estimates, explained.

What is an order of cost estimate?

It is the recognised instrument for costing a project at this stage, defined in the RICS new rules of measurement. It breaks the works into elements, prices each one, states the assumptions and the exclusions, carries a contingency and a design risk allowance, and gives a range rather than a single figure. It is deliberately not a quotation or a tender price — it is the number you set a budget against before either of those exists.

Traditionally that document is a several-thousand-pound engagement, because it is several days of a surveyor's time spent measuring and building the price up from scratch. Our cost model and our own recorded project data do that groundwork, and the quantity surveyor reviews it rather than starting from a blank sheet. That is what takes the same instrument down to £295.

How accurate is the estimate?

Every estimate comes from a calibrated cost model built on real priced projects, ranging from small bathroom refurbishments to multi-storey basement digs. The quantities are measured from your drawings, not guessed from them, and where a dimension could not be measured, the estimate says so. It is costed section by section, with subtotals so you can see where the money goes, and carries sensible allowances for contingency and risk. It is expressed as a range rather than a single false-precision number. A practising quantity surveyor checks every figure before it is sent.

What do I need to provide?

Your drawings — floor plans and elevations, existing and proposed if you have them — plus the project address and a short description of the works. PDF, JPG or PNG, up to 25 MB.

How long does it take and what does it cost?

£295, fixed, paid securely at checkout. Your estimate is delivered by email, usually within 3–5 working days.

Is it really checked by a person?

Yes. AI does the number-crunching, but a practising quantity surveyor reviews every figure before anything is sent. Nothing goes out unreviewed.

How is this different from a builder's quote?

A builder's quote is a price to win the work. This is independent cost advice with no stake in the job — a realistic budget to check your plans stack up, compare options and negotiate from, before you approach builders. For the longer answer, read how much a London extension really costs.

Who is it for?

Homeowners weighing up an extension or refurbishment before committing to design fees, architects who need early numbers for a client, developers appraising a scheme — and builders who want an independent check on a job before they price it. For fuller cost planning through a project, see Interpolare, our quantity surveying consultancy.

Written properly, not for the algorithm

The questions people actually ask us.

All cost guides →  ·  All case studies →

If you work in the trade: cost advice for architects, and estimating for builders.

Simple, fixed pricing

£295

One fixed price per estimate, back within 3–5 working days — checked and signed off by a quantity surveyor before it's sent.